Woodworking machinery
Go to product information TOP
| Model: | Model FV-AS Continuous roll press vertical finger jointer |
|---|---|
| Application | Finger joint processing of laminated wood lamina (Vertical type) |
| Features: | After the materials are loaded into the bucket, the system automatically performs finger joint processing, gluing, pressure joining, cutting to fixed length, and unload. The roll press type continuous assembler can vertically join laminas endlessly at high speed, making it ideal for general construction, medium and large cross-section laminated timber, CLT components, and 2x4 components. |
| Model: | Mode FJ-AS Continuous roll press type horizontal finger jointer [Patent] |
|---|---|
| Application | Finger joint processing of laminated wood lamina (Horizontal type) |
| Features: | This is a fully automated system that performs finger joint processing, gluing, pressure joining, cutting to fixed lengths, and unload. The roll press type continuous assembler can vertically join long laminas endlessly at high speed, making it ideal for general construction, medium and large cross-section laminated timber, CLT components, and 2x4 components. The horizontal type gives the product a beautiful finish as the joints are not exposed on the surface, and the fewer number of cutters required means low running costs and easy adjustment. |
| Model: | Model FJ-１ High Speed Finger Jointing System [PAT.] |
|---|---|
| Application | Finger joint processing of laminated wood lamina (Horizontal type) |
| Features: | Since developing the first domestically produced machine, it has been a best-selling machine with the highest delivery record. It is an high speed horizontal finger joint system that fully automates finger joint processing, gluing, cutting to fixed lengths, clamping, and unload, ensuring high-precision processing and low running costs. |
| Model: | Model YGP Grading machine with proof loader |
|---|---|
| Application | Young's modulus measurement and grading of lamina material |
| Features: | This inspection machine functions as a grading machine that measures Young's modulus and determines the grade, and also functions as a proof loader that determines whether the material has sufficient breaking strength. |
| Model: | Model PL20 Tension proof loader |
|---|---|
| Application | Proof load inspection of vertical joint lamina after finger jointing |
| Features: | This is a proof loader that performs tensile proof load testing in the "proof load testing of vertical joint laminas" defined in the Japan Agricultural Standards (JAS). It is capable of in-line testing of all items, including laminas used in the outermost and outer layers of structural laminated lumber. |
| Model: | Model OD High speed marking cross cut saw |
|---|---|
| Application | Removal of defects such as knots, cracks, and rot in lamina |
| Features: | For finger jointing, this machine removes defective parts (knots, cracks, rot) from laminas marked with chalk. It feeds the material at high speed and reliably cuts along the marks, improving material yield and reducing material costs. |
| Model: | Model ND(two sides) / NF(four sides) Mulder |
|---|---|
| Application | Thickness regulation, width regulation, and finishing processing of lamina and laminated timber for small, medium, and large cross sections. |
| Features: | Model ND is an automatic two-sided planer that regulates the thickness of vertical joint laminas after finger jointing. Model NF is an automatic four-sided planer that cuts all four sides to regulate the thickness and width of pillars, cross members, and small, medium, and large cross-section laminated timber, and is also capable of heavy cutting and light chamfering. |
| Model: | Model RZ Glue remover |
|---|---|
| Application | Removing excess adhesive from laminated timber |
| Features: | This glue remover removes adhesive that has overflowed onto the underside of the product during the pressing process of laminated lumber, beforehand at the entry side of the four-sided planer. This prevents the amount of cutting by the four-sided planer from being uneven due to overflowing adhesive. |
| Model: | Model NC130 Precut processing system |
|---|---|
| Application | Compatible with a wide variety of pre-cuts in one line |
| Features: | This one-line facility combines three processing machines (cutting and joint processing machine, top and bottom surface processing machine, and side surface processing machine) and can handle a wide variety of pre-cut materials, from cross beams and pillars to special materials and metal fittings. The processing capacity is approximately 3m²/day, and space saving has also been achieved. |
| Model: | Model NC121-2 Feather material processing machine |
|---|---|
| Application | For pre-cutting feather pattern materials |
| Features: | A wide variety of processes can be performed with just one machine, including tedious marking of rafters, bundle processing, and continuous cutting of partitions. Ideal for processing joists, cross beams, window sills, lintels, corner posts, valley timber, rafters, rafter hangers, gables, fascias, wide lattice beams, climbing beams, joists, spider cross beams, work platforms, and upper girders. |
| Model: | Model SRT Computer Controlled Clamp Feed Panel Saw |
|---|---|
| Application | Multi-blade vertical sawing, grooving, and cutting of various boards |
| Features: | This T-cut saw is equipped with vertical and horizontal circular saws and cuts various boards into small sized panels. It is ideal for cutting to the correct size for small-lot production of a wide variety of products. |
| Model: | Model TW/TXD Double End Tenona |
|---|---|
| Application | Actual processing, cutting, and grooving of furniture and building materials |
| Features: | It performs actual processing, cutting and grooving of furniture and building materials, such as general wood, plywood, fiberboard, and ceramic-based non-combustible boards, as well as resin boards and composite materials, and demonstrates excellent processing performance with high straightness. |
| Model: | Model THC/TVA Double End Tenona for Non-combustible board |
|---|---|
| Application | Various types of tenon and groove processing for exterior walls and interior panels, gouging on both ends, and cutting in the center |
| Features: | Model THC is equipped with more than 10 cutting tool shafts and performs various tenon and grooving processes on exterior and interior paneling. Model TVA is a multi-function machine that can perform joint processing on both ends of exterior and interior paneling, cut the center, and perform various grooving processes in one machine. |
| Model: | Model TW2-7 Non-combustible board Processing Machine |
|---|---|
| Application | 45 degree machining for corners (external and internal corners) |
| Features: | It is possible to process the surface for caulking and grooves at the same time as corner processing. It is possible to process short and long materials continuously, improving productivity. |
| Model: | Model DH Multisizer for Non-combustible panel |
|---|---|
| Application | Cutting into small pieces from large panel |
| Features: | This is a multi-sizer that cuts large panel into smaller pieces of standard or special sizes. By using a circular saw and up-cut method, there are fewer chips on the cut surface and dust collection is efficient, reducing the defect rate and creating a comfortable working environment. |
| Model: | Model ME Multisizer/Multi Groover |
|---|---|
| Application | Multi-blade vertical sawing, grooving, and cutting of various boards |
| Features: | In addition to being used for multi-blade vertical sawing and grooving of wide boards made from various building materials such as plywood, fiberboard, and plasterboard, it can also be used as a multi-sizer/multi-groover by equipping the main shaft with a circular saw or groove cutter. |
| Model: | Model WG４８ Multiple Sizer |
|---|---|
| Application | Straight and small cutting of thick plywood, LVL, etc. |
| Features: | １３００mm wide heavy-duty multiple sizer of dip chain feed, assuring high accuracy in cutting plywood, LVL, MDF, hardboard, etc. |
| Model: | Model RG / JRG Gang Rip Saw |
|---|---|
| Application | Multiple ripping of board |
| Features: | Multiple Rip Saws，for converting wide lumber into many pieces in one pass. Ideally designed dip chain feed construction assures absolute straight line feeding；complete with safety devices for operator． Model RG-1C : Max. saw distance ６２０mm, material thickness up to １２０mm. Complete with strong holddown rollers. Automatic lifting for holddown and saw arbor. |
| Model: | Model A-1/A-2/A-3/A-K NC Band Saw |
|---|---|
| Application | Curved cutting of furniture and formwork parts |
| Features: | Model NC band saw uses an NC band saw and a CAD/CAM system to cut curved lines for furniture and formwork components without marking or using jigs. |
| Model: | Model DSG Notum Frame Saw for thin cutting and splitting (Made by WINTERSTEIGER) |
|---|---|
| Application | Parquet flooring, pencils, skis, and small pieces of laminated wood |
| Features: | A thin long saw blade is set into the frame, allowing thin boards to be cut with a minimum cutting width of 1.2 mm. The beautiful sawing surface makes it ideal for sawing thin boards such as parquet flooring, pencils, skis, and laminated lumber. |