Machine Tools
Go to product information TOP
| Model: | Model MC7・8・10/MC828-2 Machining Center |
|---|---|
| Application | Polystyrene foam for full mold casting for automobiles, die cast, parts of machine tools, etc. |
| Features: | This machining center is used to process polystyrene foam patterns (full molds) in the production of castings, such as automotive press dies, machine tools, and industrial machinery. It is capable of processing cleanly, quickly, and accurately, and has the largest domestic market share in Japan. Model MC828-2 is a dual-gantry type equipped with two processing heads, allowing it to process the equivalent of two machines in the space of one. |
| Model: | Model STRY-5/STRY-5W Polystyrene foam Compactor for dustfoam |
|---|---|
| Application | Collecting, compressing, and compacting polystyrene foam dust discharged from polystyrene foam milling machine |
| Features: | Polystyrene foam waste generated during processing polystyrene foam patterns is collected while being compressed and solidified to reduce its volume. There is no need to replace the dust collection bag, and the scattering of dust is also suppressed. Model STRY-5W, which has double capability of dust collection function, is also in the lineup. |
| Model: | Model NC710-LS Laser Measuring Machine for Polystyrene foam pattern |
|---|---|
| Application | Non-contact laser measurement for polystyrene foam pattern |
| Features: | Dimensions of polystyrene foam patterns used in casting manufacturing are measured non-contact with a laser. Dimensional measurements that were previously done manually are automated, greatly improving the efficiency of measurement work. |
| Model: | Model NC88-1H Polystyrene foam cutting machine |
|---|---|
| Application | Cutting polystyrene foam |
| Features: | This is a gantry-type polystyrene foam cutting machine equipped with a nichrome wire that moves up and down. A heated nichrome wire runs according to a program, melting and cutting the polystyrene foam. |
| Model: | Model MC5-1223 Model Machining Center |
|---|---|
| Application | Model processing for automobile |
| Features: | ５-axis machining center, which is capable of processing full-scale model automobile, can complete full-car processing in one step by automatically performing milling, drilling, rigid-tapping etc. |
| Model: | Model MCS７１３-１ Simultaneous ５-axis control model processing machine |
|---|---|
| Application | Cutting models of automobiles and home appliances, trimming the outer periphery of resin, etc. |
| Features: | ５-axis machining center that can freely process parts with various three-dimensional shapes, such as cutting models of automobiles and home appliances, and trimming the outer periphery of resin. |
| Model: | Model MC3-47 Model Machining Center |
|---|---|
| Application | Cutting models of automobiles and home appliances, trimming the outer periphery of resin, etc. |
| Features: | 3-axis control machining center that can perform stable heavy-duty machining such as cutting models of automobiles and home appliances and trimming the outer periphery of resin. |
| Model: | Model MCS717-3 Machining Center |
|---|---|
| Application | Air craft components machining |
| Features: | This machining center is used to shape aluminum components used in aircraft fuselages. Three heads can be used simultaneously to improve work efficiency. In addition, the full cover prevents cutting dust from scattering. |
| Model: | Model MC723-1 ５-axis Aluminum Alloy・CFRP Machining Center |
|---|---|
| Application | Aluminum alloy・CFRP machining center for aircraft |
| Features: | This is a fixed-table gantry-type 5-axis controlled machining center that processes long aluminum materials and CFRP used in aircraft. |
| Model: | Model MC790-4 Machining Center |
|---|---|
| Application | Aluminum alloy machining center for railway wagons |
| Features: | Designed for cutting and shaping long aluminum alloy materials to be used for railway wagons at the window frams and others even for XNUMXm long or over. Automatic switching over from circular saw to milling cutter. Double gantry type for 20-piece XNUMX-side simultaneous processing minimizes the working time. |
| Model: | Model MC427-1 Machining Center "Neji-less" |
|---|---|
| Application | Thin aluminum sheet processing for aircraft |
| Features: | Designed for shape carving, hollowing and tapping on aluminum sheets to be used for inside or outside acanthus.. Realized the processing of the piled workpiece in state of non-screw fixation, thus saving labor and time. Max piling thickness １０mm. |
| Model: | Model MCS515-5 Aircraft NC robot router |
|---|---|
| Application | Drilling, screw tightening, and hollowing of aluminum sheet materials for aircraft |
| Features: | This is an NC controlled router machine that performs hole drilling, screw tightening and hollowing out of aluminum sheet material used in aircraft components. |
| Model: | Model MC２１７-１ ５-axis machining center for jigless profiles for aircraft wings |
|---|---|
| Application | Trimming of profile materials such as ribs on aircraft wings |
| Features: | A machining center that processes shapes that require a variety of types and dimensions, such as ribs for aircraft wings, without the need for jigs. Each clamp device moves and fixes according to the shape of the material, so it can handle a variety of processing without the need for special jigs. |
| Model: | Model NCJ-2AL/R Automatic putty polishing equipment for railway vehicles |
|---|---|
| Application | Smooth polishing after putty application during repainting of railway vehicles |
| Features: | This fully automates the putty-applying and polishing process for repainting railway cars. It produces a uniform finish without unevenness, significantly reduces the time required for polishing, and improves dirty, dangerous and difficult work by suppressing dust scattering. |
| Model: | Model MCPK14-3 CNC Curved Edge Shaper |
|---|---|
| Application | Curved edge processing, notch/recess processing and hole drilling for ultra-wide polarizing films |
| Features: | This multi-function machine performs peripheral processing, notch/recess processing, and hole drilling on polarizing films used in rectangular LCD displays such as ultra-wide in-vehicle displays and digital signage (electronic billboards). Processing can be performed without the need for changeovers, achieving high-precision processing and highly efficient production at the same time. |
| Model: | Model MC12-1 CNC Curved Edge Shaper（For resin） [PAT.P] |
|---|---|
| Application | Edge-finishing and hole-making polarizing films and thin resin boards with curves. |
| Features: | Model １２-１ edge-finishes and hole-makes stacked polarizing films and thin resin boards with curves for Instrument cluster display for automobile, Smart Phone and Smart Watch precisely and productively. The products have no burr due to firmly-fixing system. |
| Model: | Model NCP11/22 Series / SCP22-22C CNC Edge Shaper |
|---|---|
| Application | Four side shaping and mirror finishing for polarizing films |
| Features: | This is a machine for processing the edges of polarizing films and light guide plates used in LCD displays such as those on smartphones and tablet devices. Our lineup includes the NCP11/22, which is suitable for small and medium sizes, the SCP22, which is designed for high precision and ease of use, and the NCP22-2JC, which is suitable for extra large sizes. |
| Model: | Model MCP48C-6 / MCP611C-2 CNC Edge Shaper |
|---|---|
| Application | Shaping large sized light-guiding panels and light defusion panels |
| Features: | Mirror-polishing and grooving ４-side edges of light guide panels of ３２ to １５０inch TV screen. No down time for changing from mirror polishing to grooving. |
| Model: | Model MCF211-6 Complex machining center with table tilting function |
|---|---|
| Application | Outer periphery, center hole and angled hole drilling for amusement panels etc. |
| Features: | It is possible to process the outer periphery, center cutouts, and angled hole drilling of various resin boards such as amusement panels, car navigation displays, and AV equipment panels in up to six sheets at the same time. |
| Model: | Model MC12-1 CNC Curved Edge Shaper（For non-ferrous metal） [PAT.P] |
|---|---|
| Application | Processing curved edges and drilling holes in non-ferrous metals such as aluminum plates |
| Features: | This is a highly efficient machine that can cut edges of stacked thin plates into curved shapes, and perform edge processing and hole drilling. By securely fixing workpieces, it is possible to process without producing burrs. |
| Model: | Model MCD4-1 Tire Metal Mold Engraving Machine |
|---|---|
| Application | Tire mold CNC engraving ・letterring machine |
| Features: | Model MCD4-1 is a 4-axis NC-controlled machine that engraves letters onto the sides of tire molds. Model MC55-1 is a 5-axis NC-controlled machine that, in addition to letter engraving, also processes tread patterns and produces master models out of chemical wood. |
| Model: | Model NCA23-2 Aluminum Block Edge Finishing Machine |
|---|---|
| Application | Finishing ２-side edges of aluminum block |
| Features: | This machine can firmly fix and finish aluminum block without jigs after cutting process by circular saw or band saw.
Workable thickness, ３- ２００mm. An optional loading/unloading device is available for transporting heavy materials. |
| Model: | Model VR1500/VR3000/VR4000 Aluminum Block Running Saw |
|---|---|
| Application | Cutting large-sized aluminum block |
| Features: | It securely holds and cuts aluminum sheets. It is a highly efficient, high-precision machine that can meet desired size XNUMXand short delivery time. Its excellent dust collection capacity prevents cutting chips from scattering, creating a clean working environment. |
| Model: | Model MC120-3 Aluminum extrusion automatic processing line Model NCU210-6 Turret type aluminum sash processing machine |
|---|---|
| Application | Cutting and machining of extruded aluminum shapes to size, cutting and drilling of aluminum sashes |
| Features: | Model MC120-3 automatically cuts workpieces to size, processes them, and removes them from the machine by simply lining them up on the conveyor. Model NCU210-6 is a turret machine that uses NC control to perform cutting and drilling on aluminum sashes. |
| Model: | Model MC124-2 Composite machining center for aluminum materials |
|---|---|
| Application | Processing of large aluminum shapes |
| Features: | This multi-purpose machining center is equipped with a 5-axis circular saw and an ATC head, and performs cutting and milling of large aluminum profiles used for curtain walls and sashes in high-rise buildings. |