Plywood finishing machine / Inspection machine
Go to product information TOP
| Model: | Plywood finishing line with Model "Define" AI inspection [Winner of Outstanding Technical Awards of Mokkiten Japan] |
|---|---|
| Application | Plywood edge and surface inspection device using AI |
| Features: | Full automatic plywood finishing system from infeeding to sorting, including four-side sizing, thickness measuring, delamination detecting, and AI-assisted edge/surface inspection functions. Deffects difficult to be found by visual inspection are detectable by our advanced AI technology so as to achieve high precision quality control, high efficiency, and man-power / cost saving. |
| Model: | Model THC-THC Bundle Cut Sizing Line |
|---|---|
| Application | High accurate plywood sizing (not only one-by-one cut but also bundle cut) by chain feed |
| Features: | High accurate plywood sizing line by chain feed, which is capable of not only one-by-one cut but also bundle cut for cross grain or film-overlaid plywood without press mark and damage to the edges. |
| Model: | Model CVC-THC Hybrid Plywood Sizing Equipment |
|---|---|
| Application | Plywood sizing with high accuracy and efficiency even for cross grain plywood |
| Features: | Hybrid sizing line consisting of roll feed sizer and chain feed sizer assures you of high accuracy even for cross grain plywood. It is possible to cut cross grain plywood with high precision, and cutting sizes can be easily changed. Ribbon cutting is also available for effective use of cut-off part. |
| Model: | Model CVC-CVC Automatic Positioning Sizing Equipment |
|---|---|
| Application | High precision sizing processing of plywood |
| Features: | High-precision positioning device makes it easy to change cutting sizes. It also significantly improves operation rates. Ribbon cutting is also available for effective use of cut-off part. |
| Model: | Model T700&B700 Series / T52&B52 Series Wide Belt Sander |
|---|---|
| Application | Thickness dimensioning and finishing sanding for Plywood, LVL, Particle board, MDF, Laminated wood |
| Features: | Model B smoothly polishes the back surface, which serves as the sanding reference surface. By combining it with Model T, it is possible to sand both the top and bottom surfaces with high precision thickness accuracy in one pass. Model T52 and B52 are ultra-high speed feed types with a material feed speed of 150 m/min. |
| Model: | Model TBO Combined Wide Belt Sander |
|---|---|
| Application | Thickness dimensioning and finishing sanding for Plywood, Laminated wood, Furniture wood, Flooring panel |
| Features: | A wide belt sander that performs heavy sanding on both the top and bottom sides of material at high speed, accurately thickness dimensioning, and performs highly efficient finishing. It eliminates chipping, jerking, and knife marks at joints that tend to occur with automatic planers. |
| Model: | Model BP-1300 Plywood Bending Machine |
|---|---|
| Application | This machine supports delamination inspection by forcibly bending plywood to peel off weakly bonded joints. |
| Features: | By using this machine in combination with a delamination detecting machine, the probability of detecting weak adhesive joints that could not be found by the delamination inspection machine alone is improved. It can be incorporated into plywood finishing lines. |
| Model: | Model ZP524-430, with 4 sets of thickness sensor and 30-channel delamination sensors. Max. working width 60mm. Model ZPS521-430, economy type for Max.15mm thick (floorbase) |
|---|---|
| Application | Plywood thickness measuring & delamination detecting |
| Features: | Nowadays, quality control of plywood is recognized as the most important process, especially thickness accuracy and internal defect detection so-called “PANKU” or delamination. ZP series enable this process automated with high reliablity by data transaction system to the personal computer for total quality control. Kikukawa original EXCEL software is provided for data processing. Touch control panel with multi-language screens and various function for easy operation. Delamination area can be shown on the screen. Defects identified by marking device and signal lights as well as shown on the screen. The lineup also includes Model PK, which only measures peeling (punctures). |
| Model: | Model ZV/ZVS Series Thickness Measuring Machine with data transaction system to computer |
|---|---|
| Application | Plywood thickness measuring |
| Features: | Model ZV524-4 : With 4 sets of thickness sensors for max 60mm thick. Model ZVS521-3 : Economy version of ZV, for max 15mm thick. Same features as ZP series without delamination detecting. |
| Model: | Model YGV Series Grading Machine for plywood |
|---|---|
| Application | Classification by plywood bending test |
| Features: | This machine measures the bending Young's modulus while continuously one-by-one feeding of plywood . It is an in-line plywood grading machine that classifies plywood into grades. |
| Model: | Ｍodel T852-2F Core Veneer Grinder "ATOM" [PAT.] |
|---|---|
| Application | Core veneer thickness dimensioning. Overlap repair for thin plywood |
| Features: | Solution to uneven core veneer thickness, overlapped veneer repairing, delamination of weak veneer lamination, low recovery, etc. ●For thickness dimensioning of 1-ply, 3-ply or 5-ply core veneer: However twisted the veneer is, special hold-down device allows thicker part only to be dimensioned. ●For repair work of thin plywood: Automating troublesome manual repair job of overlapped portions efficiently, and save man-power remarkably. ●Long lifetime and cost saving of specially designed grinding head: Consumable abrasive belts are not used. Provided with automatic cleaning device to assure continuous operation. ●Also effective for cross grain veneers. ●Max. working width 1,270mm, min. working length 30mm. |
| Model: | Model ZX-60/ZX-100 Dry Abrasive Cleaning System |
|---|---|
| Application | Recycling used abrasive belts by dry cleaning |
| Features: | ZX using a sand-blasting technique will revolutionize your sanding operation by recycling your used abrasive belts for saving your money and improving finish quality! ZX system is easy to operate and nearly maintenance free with quick payback! Cleaning media is no hazardous, non-flammable and recycled itself. Because of dry cleaning system, no drying time and fewer belts to purchase, inventory and dispose of ZX-60 has the capability of cleaning belts up to 60”(1520mm) wide, any length. ZX-80 up to 2000mm wide and ZX-100 up to 2540mm. |